Way Ahead In Corrosion Control

Olympus Field

Deepwater installs large anode system with permanent monitoring for 24 PGBs

prb23pic1.jpg

Deepwater supplied anodes and monitoring to protect 24 subsea PGBs for 45 years

Deepwater Corrosion Services, Inc. provided a cathodic protection (CP) system for the Olympus TLP’s wellheads and permanent guide bases (PGBs) installed in the Mississippi Canyon in the Gulf of Mexico (24 total PGBs). The RetroPod XL is an anode sled that was deployed from Oceaneering’s ROV support vessel, the Ocean Alliance, and installed on the seabed in approximately 3,000 feet of water. This cathodic protection system, in conjunction with the existing PGB anodes, is designed to provide protection for 45 years.

Download case study

prb23pic6.jpg
prb23pic4.jpg
prb23_layout.jpg

Installation time: 30 hours

Four large anode sleds (Retropod XL) were deployed around the perimeter of the well bay. To reduce the number of subsea lifts, each unit was designed to protect six subsea wells.  Retroclamps were used to connect each sled to six PGBs on the wells.  Each anode sled carries 12,000 lbs. of aluminum anodes arrayed to provide 32 Amperes of CP current during the 45-year service life. 

Each Retropod XL has a monitoring station to allow confirmation of CP readings during installation and future integrity surveys. For each asset protected, one Sunstation readout displays readings from reference electrodes connected to each Retroclamp. These solar-powered readouts allow the ROV to take CP readings for multiple assets from the perimeter of the field, away from tightly-clustered subsea equipment that can be a hazard for ROV pilots, Also, Sunstations eliminate the need for a CP probe. 

Video: RetroPod™XL with SunStation™ monitoring

No related download nodes

Related content