RetroLink™
Anode retrofit string for shallow water structures

Custom Design guide

Fill in the data on the left hand side and submit the form to recieve the calculations output on the right. (Please use Firefox)

INPUT	OUTPUT (Results)
Number of Anodes on the RetroLink String 3 anodes 4 anodes 5 anodes 6 anodes 7 anodes 8 anodes 9 anodes 10 anodes 11 anodes 12 anodes 13 anodes 14 anodes 15 anodes Number of Anodesin the mud (on bottom) 2 Enter Water Resistivity ohm cm	Current at (-) 0.80 V Cathode: Life at (-) 0.80 V Cathode: Current at (-) 0.95 V Cathode: Life at (-) 0.95 V Cathode:

Sample Designs*

*Figures given assume the following: seawater resistivity: 25 ohm-cm, mud-resistivity: 75 ohm-cm, cathode potential: (-) 0.800 V vs Ag/AgCl, current density: 50 mA / m²

Hangers (Stand-Offs)

The RetroLink is attached with on of two types of stand-off: weld-on or grinnell clamp. The first is used where surface welding is permitted, usually on a vertical member. The second is used primarily on a horizontal member. The Grinnell-style clamp is equipped with anti-corrosion I-Clips to ensure no corrosion results from the attachment of the RetroLink.