Sacrificial anodes
for tanks and process vessels

Deepwater's aluminum and zinc tank anodes provide cathodic protection for any type of vessel.

Deepwater's galvanic anodes for the interior of tanks and process vessels are cast in either of two premium aluminum alloys (Deep7 and Deep10) or MIl SPec zinc alloys, for optimal performance in any conditions. Anodes are manufactured in several "standard" sizes. In addition to these, Deepwater can cast anodes to the exact specifications required. Please contact us for advice on optimizing an anode to suit your specific requirements.

How to order - To order aluminum tank anodes from Deepwater Corrosion Services or to inquire about our other aluminum and zinc anodes, please contact us:

Steve Young
syoung@stoprust.com


Note: Your inquiry may be answered directly by project management personnel from one of our foundry facilities (depending on your location). This arrangement contributes to keeping customer costs as low as possible.

Standard anode shapes

tank anodes

tank anodes Aluminium ingots for anodes Anode testing lab aluminum anode being poured ingots Induction furnace pouring an anode 
$('#product-image').cycle('fade');

Key factors

1. Foundry locations

All of the anodes that Deepwater provides are manufactured at one of our ISO 9000 certified foundries. Each foundry is located just minutes from the engineers and designers running our projects, allowing Deepwater to oversee QA/QC on every anode.

2. State-of-the-art technology

Both of our main foundries are purpose-built facilities, each less than 4 years old, equipped with the best in available technology. This allows us to produce anodes with very specific chemical compositions, to meet any requirement.

3. Standard and custom anodes

Deepwater specializes in delivering all of the basic anode types with core configurations to suit a wide range of offshore and marine applications. Because we manufacture our own molds we are able to offer competitive prices on custom anode shapes. Our in-house pipe benders can handle pipe up to 4” schedule 80.

4. Experience

Our team has a long resume of excellence producing quality anodes. . Mr. Jim Britton (CEO of Deepwater) has been responsible for many innovations in offshore corrosion control. He has specialized in the inspection and testing of anodes, and has been active on N.A.C.E. committees associated with anode quality since 1980.