• Cathodic protection
  • for Offshore Pipelines
  • for Offshore Platforms
  • for FPSO's & Floaters
  • for Docks Piers & Jetties
  • for Deep Water Equipment
  • for Wind Turbines
  • for Tanks & Process Vessels
  • for Caissons & Small Structures
• Polatrak® CP monitoring
  • SunStation™ subsea readout
  • V-String™ zinc ref. electrode
  • DR-2™ dual reference
  • DR-2 CD™ polarization monitor
  • SmartClamp™ pipeline monitor
  • MA-1™ monitored anode
  • Topside test panels
• Corrosion testing probes
  • ROV II™ (up to 10,000ft)
  • CP Gun™ for divers
  • DC II™ Drop Cell (topside)
  • Deep C Meter™ system
  • General Proximity Electrode
• I-Rod® pipe supports
  • I-Rod FAQ
  • I-Rod Strips
  • Nu-Bolt™ Assembly
  • I-Liner™ (for grinnell clamps)
• Sacrificial anodes
  • Platform Anodes
  • Pipeline Anodes (bracelets)
  • Hull-Bolted Anodes
  • Hull-Welded Anodes
  • Pier / Piling Anodes
• Corrosion inspection
  • Topside Level 1 inspections
  • Subsea (Level 2, 3)
  • NDT Testing
  • In-Service Inspection Planning
  • Inspection Reports

Cathodic protection monitoring
V-String™ zinc reference electrode

• Product overview
• Specifications
• Image gallery

Select specifications

Conductor: 1/8 Inch diameter galvanized wire with nylon coating

MIL SPEC: MIL-DTL-83420

Design life: 20-25 years

 

© 2012 Deepwater Corrosion Services Inc. Tel: (713) 983-7117 Fax: (713) 983 8858

All specifications subject to change without notice